: 10 Mistakes that Most People Make

Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. In order to prevent harm, it is important to know or identify these utility lines if your need to dig the ground. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. It is to prevent disaster. Fatal injuries can happen if underground utility lines are struck. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. When the number is called, you can let the utility companies come out and mark their respective lines.

Sometimes, even if the lines are marked accidents still happen. Utility lines are struck every 6 minutes, some place. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. This is then something that affects public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. With this machine, companies can easily locate utility lines. Companies can locate their utility lines if any property owner calls 811.

There are certain colors that mark different utility lines for easy identification. Here are the colors used for different utilities.

Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.

Temporary survey markings use pink lines. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.

Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Sewer and drain lines use the color green. A project can be derailed for a long time when these utility lines are hit.

Click here now if you want to learn more about the color coding of utility lines. View here for more.